Support 805.461.7300
Sales
Our Technology. Your Success.
Tech Notes

Adjusting the Paper Size to Print to a 4146 Label Template

The 4146 label is 1 7/16" high. 1 7/16" does not divide evenly into an 11" paper size. You must change the paper size to 8 1/2" X12" to allow for the height of the label. Follow the instructions below to adjust the paper size:

  1. From the Print Settings window of AccuZIP6, click on the Edit Template button.
  2. From the File menu, choose Page Setup.
  3. Click on the Page Setup button.
  4. Click on the Printers button and make sure that your printer is selected.
  5. Under Paper, click on the Size pull down menu and choose German Standard Fanfold 8 1/2 X 12.
  6. Click OK and OK again to return to the label template.
  7. Pull down the Report menu and choose Printer Environment.
  8. Close the template and save the changes, then print labels.

« Back to Tech Notes

I am especially motivated to take time to draw attention to Vince. In two instances, we potentially faced loss of product – significant loss, but thanks to everyone’s efforts, most notably Vince’s, we ended up with minor re-work and zero loss of stock. He’s patient and thorough, knowledgeable and resourceful. And he’s patient – A Big Plus when dealing with me. Long story short, the guy was able to not only produce a solution, but to prove to me the veracity of it. I hung up the phone saving thousands of dollars in catalog stock, not lost but salvaged, and my department had to spend just a wee bit of time on job re-work (which I was happy to do, all things considered). But I also hung up with a peculiar urge to write about Vince, incongruent as that may be since I rarely am moved to write letters of this sort. So… In a time of crisis, Vince was a terrific asset and ally. If I were his boss, I’d attempt a merit raise authorization, he was that exceptional.
H.D., Shawnee Mission, KS