How to get Saturation or High Density rates in AccuZIP6

Information relating to the presorting process in AccuZIP6, which may include rate change information and news about important updates as well as regulation changes or DMM Rules interpretation.

Moderators: Steve, Terry, Donna, Dave, Eric, MartyH, Kristen, Chrissy, Geoff, Vince

Post Reply
User avatar
Posts: 1912
Joined: Tue Sep 19, 2006 3:29 pm

How to get Saturation or High Density rates in AccuZIP6

Post by Eric » Tue Apr 20, 2010 7:59 am

Your database has to be in walk sequence order prior to opening it in AccuZIP6. If your list is in walk sequence order and you have a sequence number field in the database where the sequence numbers are in walk sequence order, then you can get the walk sequence saturation or high density rates in AccuZIP6.

When you open the list in AccuZIP6, make sure you assign the field named walkseq_ to the sequence number field in your list.

Assign your other fields as usual. If you’re presorting letters, then validate the list. If this is a simplified address mailing or if you’re presorting flats, don’t validate.
After validation, pull down the sort menu to Presort Mail.

In the Presort Setup widow, make sure you check the Include Carrier Route box. If you’re presorting Letters, make sure Machinable and Print Barcode are also checked. If you’re presorting flats, you won’t need to check the Print barcode box.

Enter your 5 digit ZIP Code, and if you plan on dropping mail at your SCF facility, check the SCF box.

Presort your list, and you should get saturation or high density rates.
Chat with an AccuZIP6 technician weekdays from 7-4 PST with AccuZIP6 Live Online Support

Post Reply