AccuZIP6 Tracking On/Off

Information regarding the AccuTrace Tracking module for use with AccuZIP6 and the Intelligent Mail Barcode

Moderators: Steve, Terry, Donna, Dave, Eric, MartyH, Kristen, Chrissy, Geoff, Vince

Post Reply
User avatar
Site Admin
Posts: 620
Joined: Wed Sep 20, 2006 3:20 pm

AccuZIP6 Tracking On/Off

Post by Dave » Mon Nov 14, 2011 10:09 am

If you would like to presort and not use up the limited serial numbers that were assigned to you for the AccuTRACE because you are not tracking this mailing, follow the steps below.

There are two batch files that will launch the AccuZIP6 program in tracking mode or Non tracking mode. You can use the AZtracking_on.bat when you would like to launch the software and track the mail pieces and the AZtracking_off.bat when you do not want to track the mail pieces and not use up the serial numbers provided for AccuTRACE.

1. Download and extract the file to the AccuZIP6 5.0 folder.
2. Create a “C:\tracking\off” and “C:\tracking\on” folder on your hard drive.
3. Copy the Current “C:\Program Files\AccuZIP6 5.0\iMail” folder to the ON folder.
4. Go back to AccuZIP6 and change the settings of the Additions>AccuTRACE>IMB setup to a non tracking service type (301) and a different mailer ID
5. Presort a list and click print in the print settings screen with the IMB option selected and Upload to AccuTRACE not selected.
6. Then Save that new “C:\Program Files\AccuZIP6 5.0\iMail” folder to the OFF folder.
7. When you launch the program using the AZtracking_on.bat file the tracking imail folder will be copied over and then the program will launch, if you launch it with the other then it copies over the non tracking folder first.
8. Please test these scenarios before you go live to insure that the setup info is changed with each bat file.

Post Reply