First Class Letter Nonmachinable Surcharge

Discuss any DMM issues that may be confusing

Moderators: Chrissy, Steve, Terry, Donna, Dave, Eric, MartyH, Kristen

Post Reply
User avatar
Eric
Moderator
Posts: 1910
Joined: Tue Sep 19, 2006 3:29 pm
Contact:

First Class Letter Nonmachinable Surcharge

Post by Eric » Wed May 16, 2007 1:05 pm

NOTE: Standard Class Letters no longer have a surcharge!

2.1 Criteria for Nonmachinable Letters
A letter-size piece is nonmachinable if it has one or more of the following characteristics (see 601.1.4 to determine the length, height, top, and bottom of a mailpiece):

a. Is over 3.3 ounces, unless prepared as an automation-rate letter.

b. Has an aspect ratio (length divided by height) of less than 1.3 or more than 2.5.

c. Is polybagged, polywrapped, or enclosed in any plastic material.

d. Has clasps, strings, buttons, or similar closure devices.

e. Contains items such as pens, pencils, or loose keys or coins that cause the thickness of the mailpiece to be uneven (see 601.11.18, Odd-Shaped Items in Paper Envelopes).

f. Is too rigid (does not bend easily when subjected to a transport belt tension of 40 pounds around an 11-inch diameter turn).

g. For pieces more than 4-1/4 inches high or 6 inches long, the thickness is less than 0.009 inch.

h. Has a delivery address parallel to the shorter dimension of the mailpiece.

i. Self-mailers with a folded edge perpendicular to the address if the piece is not folded and secured according to 3.13.1, Folded Self-Mailer.

j. Booklet-type pieces with the bound edge (spine) along the shorter dimension of the piece or at the top, unless prepared according to 3.13.
Chat with an AccuZIP6 technician weekdays from 7-4 PST with AccuZIP6 Live Online Support

Post Reply