permit must reference active permit for the associated .mpa

Information regarding the mail.dat electronic reports for PostalOne! add-on module for AccuZIP6.

Moderators: Chrissy, Steve, Terry, Donna, Dave, Eric, MartyH, Kristen, Geoff, Vince

Post Reply
User avatar
Eric
Moderator
Posts: 1909
Joined: Tue Sep 19, 2006 3:29 pm
Contact:

permit must reference active permit for the associated .mpa

Post by Eric » Tue Jan 15, 2013 1:34 pm

Job Validation Error

DESCRIPTION: The value provided for .mpa Mail Owner's Lcl Permit Ref Num/Int'l Bill Num and .mpa Mail Owne'rs Lcl Permit Ref Num/Int'l Bill Num - Type combination was [first 8 digits of mailer id]; the permit must reference an active permit for the associated .mpa Postage Payment Method at the .mpa Permit ZIP+4 code


ACTION: Populate the .mpa Mail Owner's Lcl Permit Ref Num/Int'l Bill Num and .mpa Mail Owner's Lcl Permit Num/Int'l Bill Num - Type field with a value that references an active permit.

AccuZIP6 Solution:

In the Print Presort window, click on Print Reports.
Make sure the Mailing Statement box is checked and the box beneath it is unchecked. Check Create PDF and click Print.

In the Mailing Statement Setup window, enter the Permit Holder's permit number into the box named CUSTOMER REF ID:.

Press Continue to generate the PDF. This will write the correct permit number into field 1107 of the maildat.mpa file.
Chat with an AccuZIP6 technician weekdays from 7-4 PST with AccuZIP6 Live Online Support

Post Reply